FTTH Assembly SC Fusion splice on connector is optical fiber fast connector, which used for splicing point inside the connector end, equivalently eliminate the pigtails when splicing. The advantage is no need additional protection after splice, such as splice tray, splice closure, distribution box. In contract to the design of mechanical splice connector, it save V-groove mechanical connector maintenance and operation cost.

Description

1. Model No.: FLK-SOC-SA01
2. Applicable for cable : 0.9mm, 2.0mm, 3.0mm indoor cable or Drop cable
3. Fiber type: SM G652D, 657A & 657B
4. Polishing Type: UPC or APC
5. Insert loss: ≤ 0.3dB
6. Return loss: UPC≥50dB, APC≥60dB
7. Tensile strength: >60 N

8. Opertating temperature: -40～+75℃

Feature

Field-termination connector with no epoxy or polishing required
No matching gel enables low reflection and high reliability
Splicing point is inside of the connector. No additional splicing work required
Easily assembled with one-touch, push-pull system
Used for φ3.0mm, φ2.0mm cable and 3x2mm drop cable etc
The fusion splice position can be protected by the heat shrinkable tube inside, not easy broken
The operator can confirm if the splicing is successful by the monitor of fusion splicing machine, to make it have more stability
Compliance to GR-326-CORE